S13 Integrated Specifications & Key Benefits
S13 Engine Technical Specifications
-
Engine Type
Diesel, 4-Cycle
-
Configuration
Inline 6-Cylinder -
Displacement
12.7L (777 cu. in.) -
Bore & Stroke
5.12 in. & 6.30 in. (130 mm & 160 mm) -
Compression Ratio
23:1 -
Aspiration
Fixed Geometry Turbocharger -
Combustion System
1800 bar Common Rail -
Engine Lubrication
47.5 Quarts (45 L) -
Total Engine Weight
(Dry) 2284 lbs. (1036 kg) -
Valves
4 Valves Per Cylinder, Dual Overhead Camshaft -
B10 Design Life
1,200,000 mi (1,931,000 km)
Industry Leading Engine Warranty
-
Base Engine
2 years, unlimited miles, unlimited hours -
Base Major Components
5 years, 500,000 miles -
Base Towing*
2 years, unlimited miles, unlimited hours -
Optional Engine
Up to 6 years, 600,000 miles -
Optional Major Component
Up to 7 years, 700,000 miles
T14 Transmission Key Benefits
Deep low-end gearing and shifting smoothness, delivering efficiencies of a direct drive in an overdrive package
14 speed with 2 crawler gears
Lightweight, efficiently packaged and robustly designed
Single countershaft design for simplicity and reliability
Vocational specific drive modes including paver, off-road and split shaft
LT® Series and RH™ Series
Gear | Ratio | % Step |
R2 | 12.60 | |
R1 | 16.23 | |
1 | 20.81 | 29% |
2 | 16.16 | 29% |
3 | 12.57 | 29% |
4 | 9.76 | 29% |
5 | 7.56 | 29% |
6 | 5.87 | 29% |
7 | 4.55 | 29% |
8 | 3.53 | 28% |
9 | 2.77 | 29% |
10 | 2.15 | 29% |
11 | 1.66 | 29% |
12 | 1.29 | 29% |
13 | 1.00 | 28% |
14 | 0.78 | - |
LT® AND RH™ SERIES POWER & TORQUE CURVE
HP @ 1800 RPM |
TORQUE [LB-FT] @ 900 RPM | GOVERNED SPEED [RPM] |
370 | 1250 | 2000 |
400 | 1450 | 2000 |
400 | 1850 | 2000 |
430 | 1550 | 2000 |
450 | 1750 | 2000 |
470 | 1750 | 2000 |
515 | 1850 | 2000 |
HX® Series
Gear | Ratio | % Step |
1 | 20.81 | 29% |
2 | 16.16 | 29% |
3 | 12.57 | 29% |
4 | 9.76 | 29% |
5 | 7.56 | 29% |
6 | 5.87 | 29% |
7 | 4.55 | 29% |
8 | 3.53 | 28% |
9 | 2.77 | 29% |
10 | 2.15 | 29% |
11 | 1.66 | 29% |
12 | 1.29 | 29% |
13 | 1.00 | 28% |
14 | 0.78 | - |
R Gear | Ratio |
R6 | 4.59 |
R5 | 5.91 |
R4 | 7.61 |
R3 | 9.81 |
R2 | 12.60 |
R1 | 16.23 |
HX® Series power and torque curve
HP @ 1800 RPM |
Torque [LB-FT] @ 900 RPM | Governed Speed [RPM] |
400 | 1450 | 2000 |
430 | 1550 | 2000 |
450 | 1750 | 2000 |
470 | 1750 | 2000 |
515 | 1850 | 2000 |
LT® AND RH™ SERIES T14 TRANSMISSION Base Warranty
-
Transmission
5 years, 750,000 miles (1,200,000 km)
-
Clutch
3 years, 350,000 miles (563,000 km)
HX® SERIES T14 TRANSMISSION BASE WARRANTY
-
Transmission, Clutch and
Less than 52K rear axles rating: 3 years, unlimited miles
-
Transmission Mounted PTO Base Warranty (includes towing)
Greater than 52K rear axles rating: 2 years, unlimited miles
Dual Stage Aftertreatment Key Benefits
The Dual Stage Aftertreatment system allows the powertrain to focus on what it does best: delivering power- when and where you need it.
• DPF service intervals extended due to less soot produced by the engine
• No diesel oxidation catalyst, no fuel dosing
• Easy access to DPF for easy serviceability
DPF filter does not need to be cleaned/replaced until 650,000 miles @ >8.2 mpg
Robust, compact aftertreatment allows less heat loss and helps significantly in improving the fuel economy and packaging